Bad Elf Flex Mini: Stakeout procedure
Introduction
Navigate to predetermined coordinates via the Bad Elf Flex App connected to the Bad Elf Flex Mini.
Step-by-Step
Option 1: Add Points Manually
- Navigate to App Settings -> Stored Locations -> “+”
 
  
 
 
 
- Add a point by either: 
 
- Typing the values into the corresponding boxes 
 
- Using the current GNSS location
 
  
 
- The .csv column format for importing locations into the app is: Name, Latitude, Longitude, Ellipsoidal height, and Datum.
 
 - The lat/lon should be in decimal degrees and negative west, and the ellipsoidal elevation should be in meters.
 
 - The 1st/2nd/3rd Columns: Name/Lat/Long are required. Name field needs to have at least 1 letter.
 
 
 The 4th/5th Columns: Ellipsoidal height/datum are optional. The 4th/5th Columns: Ellipsoidal height/datum are optional.
 
 
 
 
- Move CSV to the mobile device driving the Bad Elf Flex App. (Note the location of your downloaded CSV)
 
 - Android Users, we recommend uploading your CSV to Google drive for maximum compatibility.  
 
 
- Navigate to App Settings
 
  
 
 
 
- Select Navigation→ Stored Locations
 
  
 
 
 
- Select Import
 
  
 
 
 
- Once your CSV is uploaded. Select a point to navigate to it.
 
  
 
 
 
- The app shows the distance and bearing from your location to the target location.
 
  
 
 
 
- Related Articles
- Bad Elf Flex Mini: Updating Firmware- Overview Ready to upgrade your Flex Mini to the latest firmware? Just follow these steps: On your phone or tablet, install or upgrade to the latest public Bad Elf Flex utility app available on the App Store (iOS) or Google Play Store (Android). ... 
- Bad Elf Flex Mini: Point/Track Logs - CSV Specification- CSV Specification The Bad Elf Flex Mini is capable of exporting data logs as a lightweight .csv file. The list below contains the field names and definitions for a Bad Elf Flex Mini generated point or track log CSV file. Field Name Description LINE ... 
- Bad Elf Flex Mini: Upgrade to Flex Mini Extreme (BE-GPS-3500)- Overview: This article provides step-by-step instructions on how to upgrade your Bad Elf Flex Mini Standard (BE-GPS-2500) to the Flex Mini Extreme (BE-GPS-3500). Please ensure your device is running firmware build 1314 or later before proceeding. ... 
- Bad Elf Flex Mini: Bluetooth Pairing with Android- Connect your Bad Elf Flex Mini to your Android phone or tablet by following these steps: Once pairing is completed, opening the Bad Elf Flex App will initiate the Bluetooth connection. Close the Bad Elf Flex app on Android if you have not already. ... 
- Bad Elf Flex Mini: Bluetooth Pairing with iOS- Connecting a Bad Elf Flex Mini to your iOS phone or tablet by following these steps: Power ON your Bad Elf Flex Mini by pressing and holding the power button for 1 second On your iOS Device, open the Settings app, tap Bluetooth, and turn Bluetooth ON ...