Bad Elf Flex App: Standalone Data Collection

Bad Elf Flex App: Standalone Data Collection

Bad Elf Flex App: Standalone Data Collection

Introduction

Collect data using the Bad Elf Flex App.



Step-by-Step

From the Home Screen Navigate to: Data Collection→ Standalone Data Collection

      
      
  1. Setup checklist verifies: 
    1. App is connected to Bad Elf
    2. Project name is set if desired

  2. Log instant point: The name is incremented based on what is entered as the point name prefix.

  3. Point name prefix: Tap to change the point name prefix.

  4. Log named point: Log a point outside of instant point increments. Here you can designate a separate named point.

  5. Track log settings: Adjust the interval of saved points for track logs.

  6. Start/stop track logging: Record points on your Flex over time until you press the stop button. Track logging will also automatically be stopped upon device power down.



    • Related Articles

    • Bad Elf Flex Mini: Best Practices for GNSS Data Collection

      Introduction The Bad Elf Flex Mini is a compact, dual-frequency GNSS receiver designed for reliable sub-meter to centimeter-level positioning. In Standard mode (BE-GPS-2500), it provides 1.5m horizontal accuracy. Upgrading to the Extreme variant ...

    • Bad Elf Flex Mini: Enabling Android Mock Location

      Introduction Some Android applications do not allow users to select an external GNSS receiver directly. In these cases, Android uses a feature called “mock location” to let one app supply location data to the entire device. This guide explains how to ...

    • Bad Elf Flex App: Share NTRIP Diagnostic File

      Bad Elf Flex App: Share NTRIP Diagnostic File Overview To assist with troubleshooting, we may need the diagnostic file from the Bad Elf Flex App’s NTRIP Configuration screen. This can be done even without a Bad Elf Flex or Flex Mini connected. Follow ...

    • Bad Elf Flex Mini: Hardware Overview

      The Bad Elf Flex Mini GNSS receiver has an interface that will allow users to navigate and adjust settings, as well as use the various functions of the Bad Elf Flex Mini. Product Overview - Front Up, Down, Enter, and ESC/BACK buttons: Allows you to ...

    • Bad Elf Flex App: RTCM Diagnostics Viewer

      Bad Elf Flex App: RTCM Diagnostics Viewer Introduction The Bad Elf Flex app contains a feature to view the contents of RTCM messages sent by your local real-time GNSS corrections network to diagnose any potential compatibility issues. By entering ...