Bad Elf Flex: Basics of Operation

Bad Elf Flex: Basics of Operation

Powering On and Off

To turn the Bad Elf Flex on, press and hold the power button for 3 seconds. It will take approximately 20 seconds to start up and to begin searching for satellites.


To turn the Bad Elf Flex off, press and hold the power button until the display turns off.

Using Your Bad Elf Flex

We’ve designed the Flex to be as simple and intuitive as possible. See the pictures and illustrations below for a description of the primary components of the user interface.


Status information - LCD & LEDs

The LCD display is the primary user interface of the Bad Elf Flex.


Status Icons

The status bar at the top of the screen provides status of the GNSS engine, Bluetooth, and battery. Each of the icons represents the current state of a particular function of the Bad Elf Flex. The table below contains descriptions of each icon.



For further assistance, please contact our support team via support@bad-elf.com.

    • Related Articles

    • Bad Elf Flex: Anatomy of a Flex

      The Bad Elf Flex GNSS device has an interface that will allow users to use the front buttons and LCD to navigate and adjust settings, as well as use the various functions of the Flex. Product Overview - Front Antenna cap: A removable cap that ...

    • Bad Elf Flex: LEDs

      The LEDs located directly below the display shows the following status information Power LED (left) The power status LED indicates the battery condition, charging source type, and operating status. Color Meaning Solid Green Fully charged Pulsing ...

    • Bad Elf Flex: Keypad breakdown

      Keypad The keypad on the front of the Bad Elf Flex provides buttons for interacting with the screens and menus. Descriptions for each button are provided in the table below. Button Function Arrow buttons Used to navigate the menus, submenus, and ...

    • Bad Elf Flex: Bluetooth Pairing with Android

      Connect your Bad Elf GNSS receiver to your Android phone or tablet by following these simple steps: Close the Bad Elf Flex app on Android if you have not already. Power ON your Bad Elf Flex by pressing and holding the power button for 1 second. On ...

    • Bad Elf Flex: Bluetooth Pairing with iOS

      Connecting a Bad Elf Flex to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf Flex by pressing and holding the power button for 1 second On your iOS Device, open the Settings app, tap Bluetooth, and turn ...