Bad Elf Flex: Bluetooth Function
Bluetooth Function
Basic Bluetooth options are available from this function
Actions
Press the enter button
on Bluetooth Status to display the number of active Bluetooth connections
Press the back button
to return to the Bluetooth options menu
Press the enter button
You’ll hear a beep when this action completes
For further assistance, please contact our support team via support@bad-elf.com.
Related Articles
Bad Elf Flex: Basics of Operation
Powering On and Off To turn the Bad Elf Flex on, press and hold the power button for 3 seconds. It will take approximately 20 seconds to start up and to begin searching for satellites. To turn the Bad Elf Flex off, press and hold the power button ...Bad Elf Flex: WiFi Function
WiFi Function Use this feature to enable or disable the internal Wi-Fi capability This feature is unused but may be enabled in future firmware releases. Turning on Wi-Fi can limit Bluetooth range Currently, there is no way to configure Wi-Fi networks ...Bad Elf Flex: Using the Bad Elf Flex with PIX4Dcatch
Overview This guide walks you through connecting, mounting, and configuring the Bad Elf Flex™ GNSS receiver with PIX4Dcatch on an iPhone or iPad. By combining high-accuracy GNSS with mobile 3D capture, this setup enables RTK-enabled workflows for ...Bad Elf Flex: Bluetooth Pairing with iOS
Connecting a Bad Elf Flex to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf Flex by pressing and holding the power button for 1 second On your iOS Device, open the Settings app, tap Bluetooth, and turn ...Bad Elf Flex: Bluetooth Pairing with Android
Connect your Bad Elf GNSS receiver to your Android phone or tablet by following these simple steps: Close the Bad Elf Flex app on Android if you have not already. Power ON your Bad Elf Flex by pressing and holding the power button for 1 second. On ...