Bad Elf Flex: Bluetooth Pairing with Android (Samsung)

Bad Elf Flex: Bluetooth Pairing with Android (Samsung)

Connecting a Bad Elf Flex to your phone or tablet couldn't be easier, just follow these simple steps:


  1. Power ON your Bad Elf Flex by pressing and holding the power button for 1 second

  2. On your Android device, open the Settings app, tap Connections, then tap Bluetooth a list should appear under Available devices.



  3. You should see your Bad Elf Flex listed in the Available devices. It may also include the unit's serial number in the name

If you don't see it in either list, try turning Bluetooth off and back on with the toggle at the top of the Bluetooth screen.

  1. Tap on the entry for your Flex to begin pairing.  You should presently see a pairing request appear on your Android device as well as your Flex- tap Pair.



  2. You also need to tap the center button on the Bad Elf Flex to accept the pairing. If you forget this important step,the pairing will fail. 

  3. Once the pair has been accepted by both the Android device and the Bad Elf Flex you are now ready to start using your Flex

    If your 3rd party app has direct integration with Bad Elf GPS Receivers, selection of the Bad Elf as the preferred data source will occur from within the 3rd party app.  A great example of this workflow is found in Esri mobile offerings.

Android settings may differ between models of the phone or tablet for the general Android variant


For any further assistance, please contact our support team via support@bad-elf.com.




    • Related Articles

    • Bad Elf Flex: Bluetooth Pairing with Android

      Connect your Bad Elf GNSS receiver to your Android phone or tablet by following these simple steps: Close the Bad Elf Flex app on Android if you have not already. Power ON your Bad Elf Flex by pressing and holding the power button for 1 second. On ...

    • Bad Elf Flex: Bluetooth Pairing with iOS

      Connecting a Bad Elf Flex to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf Flex by pressing and holding the power button for 1 second On your iOS Device, open the Settings app, tap Bluetooth, and turn ...

    • Bad Elf Flex Bluetooth Best Practices and Troubleshooting

      Bad Elf Flex Bluetooth Best Practices and Troubleshooting For articles on the initial Bluetooth pair process please click the link the corresponding to your phone/table model Bad Elf Flex: Bluetooth Pairing with iOS Bad Elf Flex: Bluetooth Pairing ...

    • Bad Elf Flex: Anatomy of a Flex

      The Bad Elf Flex GNSS device has an interface that will allow users to use the front buttons and LCD to navigate and adjust settings, as well as use the various functions of the Flex. Product Overview - Front Antenna cap: A removable cap that ...

    • Bad Elf Flex: Bluetooth Function

      Bluetooth Function Basic Bluetooth options are available from this function Actions Press the enter button on Bluetooth Status to display the number of active Bluetooth connections Press the back button to return to the Bluetooth options menu Press ...