Bad Elf Flex: Keypad breakdown

Bad Elf Flex: Keypad breakdown

Keypad

The keypad on the front of the Bad Elf Flex provides buttons for interacting with the screens and menus. Descriptions for each button are provided in the table below.



Button

Function

Arrow buttons

Used to navigate the menus, submenus, and selections found in the one of the Bad Elf Flex features

Enter button

Used to accept an action or open a submenu within a feature

Back button

Used to exit a submenu or feature

Power button

Holding for 3 seconds to power on or power off the Bad Elf Flex.


Note: holding for 15 seconds achieves a system shutdown


For further assistance, please contact our support team via support@bad-elf.com.

    • Related Articles

    • Bad Elf Flex: Anatomy of a Flex

      The Bad Elf Flex GNSS device has an interface that will allow users to use the front buttons and LCD to navigate and adjust settings, as well as use the various functions of the Flex. Product Overview - Front Antenna cap: A removable cap that ...

    • Bad Elf Flex: Basics of Operation

      Powering On and Off To turn the Bad Elf Flex on, press and hold the power button for 3 seconds. It will take approximately 20 seconds to start up and to begin searching for satellites. To turn the Bad Elf Flex off, press and hold the power button ...

    • Bad Elf Flex: Bluetooth Pairing with Android

      Connect your Bad Elf GNSS receiver to your Android phone or tablet by following these simple steps: Close the Bad Elf Flex app on Android if you have not already. Power ON your Bad Elf Flex by pressing and holding the power button for 1 second. On ...

    • Bad Elf Flex: Bluetooth Pairing with iOS

      Connecting a Bad Elf Flex to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf Flex by pressing and holding the power button for 1 second On your iOS Device, open the Settings app, tap Bluetooth, and turn ...

    • Bad Elf Flex: LEDs

      The LEDs located directly below the display shows the following status information Power LED (left) The power status LED indicates the battery condition, charging source type, and operating status. Color Meaning Solid Green Fully charged Pulsing ...