Bad Elf Flex: Primary User Interface

Bad Elf Flex: Primary User Interface

This feature provides detailed information specific to the performance of the GNSS engine including:

  • GNSS accuracy measures

  • GNSS positional measurements

  • Operating configuration

  • Sky plots

  • RTK statistics

  • L-Band Statistics

  • Orthometric heights


All logging recording features are available while using this feature.


Navigating the GNSS & RTK feature

  • Left and right arrow buttons select the previous or next display screen

  • Enter button selects the logging functions

  • Back button returns to the main menu


While in the logging submenu

  • Up , down , left , or right buttons scroll throw the logging selections

  • Enter button selects a logging operation

Back button dismisses the logging submenu For further assistance, please contact our support team via support@bad-elf.com.

    • Related Articles

    • Bad Elf Flex: Basics of Operation

      Powering On and Off To turn the Bad Elf Flex on, press and hold the power button for 3 seconds. It will take approximately 20 seconds to start up and to begin searching for satellites. To turn the Bad Elf Flex off, press and hold the power button ...

    • Bad Elf Flex: Anatomy of a Flex

      The Bad Elf Flex GNSS device has an interface that will allow users to use the front buttons and LCD to navigate and adjust settings, as well as use the various functions of the Flex. Product Overview - Front Antenna cap: A removable cap that ...

    • Bad Elf Flex: Settings Feature

      Flex Settings Feature The settings feature of the Bad Elf Flex provides the ability to modify some of the settings directly on the Bad Elf Flex. Correction source selection GNSS configuration Display settings Charging system status Flex information ...

    • Bad Elf Flex: GNSS & RTK Feature

      Primary GNSS Status Page Field descriptions Horizontal - the reported statistical accuracy reported by the GNSS Elevation - the reported GNSS elevation as configured by the Bad Elf Flex app. This includes the specific geoid model currently in use. ...

    • Bad Elf Flex: Logging into an RTK Network

      This article will provide the steps to log in to your RTK network from your Bad Elf Flex app. Creating your NTRIP Profile: Power on Bad Elf Flex and connect to a phone or tablet via Bluetooth Open the Bad Elf Flex app on a phone or tablet with an ...