Bad Elf Flex: WiFi Function
WiFi Function
Use this feature to enable or disable the internal Wi-Fi capability
This feature is unused but may be enabled in future firmware releases.
Turning on Wi-Fi can limit Bluetooth range
Currently, there is no way to configure Wi-Fi networks
The main menu of the Wi-Fi Function displays status and configuration
The information displayed includes Wi-Fi module power, auto-connect enabled, IP address, and network name
Press the enter button
to enable or disable various settings
Press the back button
to return to the main menu
From the settings page
Press the up and down arrow buttons <> select a setting
Press the enter button
Press the back button
Turning the Wi-Fi on/off powers on/off the wifi module
Turning on auto-connect enables automatic connection to a stored Wi-Fi profile (SSID & password)
Wi-Fi status - powered off | WiFi status - powered on and connected | Wi-Fi settings - radio power and auto-connect |
Related Articles
Bad Elf Flex: Keypad breakdown
Keypad The keypad on the front of the Bad Elf Flex provides buttons for interacting with the screens and menus. Descriptions for each button are provided in the table below. Button Function Arrow buttons Used to navigate the menus, submenus, and ...Bad Elf Flex: Basics of Operation
Powering On and Off To turn the Bad Elf Flex on, press and hold the power button for 3 seconds. It will take approximately 20 seconds to start up and to begin searching for satellites. To turn the Bad Elf Flex off, press and hold the power button ...Bad Elf Flex: Anatomy of a Flex
The Bad Elf Flex GNSS device has an interface that will allow users to use the front buttons and LCD to navigate and adjust settings, as well as use the various functions of the Flex. Product Overview - Front Antenna cap: A removable cap that ...Bad Elf Flex: Bluetooth Pairing with Android
Connect your Bad Elf GNSS receiver to your Android phone or tablet by following these simple steps: Close the Bad Elf Flex app on Android if you have not already. Power ON your Bad Elf Flex by pressing and holding the power button for 1 second. On ...Bad Elf Flex: Bluetooth Pairing with iOS
Connecting a Bad Elf Flex to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf Flex by pressing and holding the power button for 1 second On your iOS Device, open the Settings app, tap Bluetooth, and turn ...