Bluetooth GPS: Datalogger Settings

Bluetooth GPS: Datalogger Settings

Here is a breakdown of the datalogger settings within the Bad Elf GPS app for the Bad Elf Pro, Pro+, and GNSS Surveyor.


Datalogger

Turn data logging on and off and save points of interest on your Bad Elf GPS.


Logging Rate

The above setting determines the rate at which the Bad Elf GPS records your location in a data logged trip. For most trips, "6 per min" is recommended because a higher rate creates proportionally larger trip files.


Smart Filter

Smart filtering lets you set a speed threshold below which data logging is paused. For example, when the smart filter is set to "Flying," your location and speed are only recorded if your speed exceeds 50mph. This results in a smaller trip file. If smart filtering is disabled, all points will be recorded.


Auto-logging

The above setting determines when your Bad Elf GPS should automatically start data logging.


If you have any questions, contact us at support@bad-elf.com.



    • Related Articles

    • Bluetooth GPS: Bluetooth Settings

      Here is a breakdown of the Bluetooth settings within the Bad Elf GPS app for the Bad Elf Pro, Pro+, and GNSS Surveyor. Enabled on startup This setting determines whether pairing via Bluetooth is to be enabled or disabled when your Bad Elf GPS starts ...

    • Bluetooth GPS: Power Settings

      Here is a breakdown of the power settings within the Bad Elf GPS app for the Bad Elf Pro, Bad Elf Pro+, and Bad Elf GNSS Surveyor. Auto-on with USB power When set to "Yes", this setting causes your Bad Elf GPS to turn on automatically any time it is ...

    • Bluetooth GPS: Datalogger Settings

      Dynamic Platform Models The following configurations adjust the u-blox navigation engine to the expected user environment. Platform Description Portable Applications with low acceleration, e.g. portable devices. Suitable for most situations. ...

    • Bluetooth GPS: Display Settings

      Here is a breakdown of the display settings within the Bad Elf GPS app for the Bad Elf Pro, Bad Elf Pro+, and Bad Elf GNSS Surveyor. Speed Altitude Display Coordinates Altimeter Setting (Pro+ and GNSS Surveyor only) Pressure (Pro+ and GNSS Surveyor ...

    • Bluetooth GPS: Anatomy of a Bad Elf Bluetooth Receiver

      The Bad Elf receiver has three buttons to the left of the front LCD display. These are your main unit controls. The top button controls power and the LCD backlight, the middle button controls Bluetooth and barometer* settings, while the bottom button ...