Bluetooth GPS: Datalogger Settings
Dynamic Platform Models
The following configurations adjust the u-blox navigation engine to the expected user environment.
Platform | Description |
Portable | Applications with low acceleration, e.g. portable devices. Suitable for most situations. |
Stationary | Used in timing applications (antenna must be stationary) or other stationary applications. Velocity restricted to 0 m/s. Zero dynamics assumed. |
Pedestrian | Applications with low acceleration and speed, e.g. how a pedestrian would move. Low acceleration assumed. |
Automotive | Used for applications with equivalent dynamics to those of a passenger car. Low vertical acceleration assumed. |
At sea | Recommended for applications at sea, with zero vertical velocity. Zero vertical velocity assumed. Sea level assumed. |
Airborne <1g | Used for applications with a higher dynamic range and vertical acceleration than a passenger car. No 2D position fixes supported. |
Airborne <2g | Recommended for typical airborne environment. No 2D position fixes supported. |
Airborne <4g | Only recommended for extremely dynamic environments. No 2D position fixes supported. |
If you have any questions, contact us at support@bad-elf.com.
Related Articles
Bluetooth GPS: Datalogger Settings
Here is a breakdown of the datalogger settings within the Bad Elf GPS app for the Bad Elf Pro, Pro+, and GNSS Surveyor. Datalogger Turn data logging on and off and save points of interest on your Bad Elf GPS. Logging Rate The above setting determines ...
Bluetooth GPS: Bluetooth Settings
Here is a breakdown of the Bluetooth settings within the Bad Elf GPS app for the Bad Elf Pro, Pro+, and GNSS Surveyor. Enabled on startup This setting determines whether pairing via Bluetooth is to be enabled or disabled when your Bad Elf GPS starts ...
Bluetooth GPS: Power Settings
Here is a breakdown of the power settings within the Bad Elf GPS app for the Bad Elf Pro, Bad Elf Pro+, and Bad Elf GNSS Surveyor. Auto-on with USB power When set to "Yes", this setting causes your Bad Elf GPS to turn on automatically any time it is ...
Bluetooth GPS: Android Mock Location App settings
This article will specify how each mock location app will select a Bad Elf GPS as it's main GPS receiver. Allowing the mock location workflow to take over as the main GPS receiver for the Android phone/tablet. To user a mock location app for your ...
Bluetooth GPS: Online Settings Editor
If you are not using your Bad Elf Pro+, or GNSS Surveyor with an iPhone or iPad, then you are unable to use the Bad Elf GPS app to change settings on your Elf. For this reason, we created a browser-based tool to modify the settings from a laptop or ...