Bluetooth GPS: Pairing a Bluetooth Bad Elf with iOS

Bluetooth GPS: Pairing a Bluetooth Bad Elf with iOS

Connecting a Bluetooth Elf to your phone or tablet couldn't be easier, just follow these simple steps:

  1. Power ON your Bad Elf GPS device by pressing and holding the power (top) button for 1-2 seconds.

  1. On your iOS Device, open the Settings app, tap Bluetooth, and turn Bluetooth ON if needed.

  1.  You should see your Bad Elf GPS listed. It may also include the unit's serial number in the name.

  • If you don't see it in the list, scroll down and look under OTHER DEVICES (as pictured above). 

  • If you don't see it in either list, try turning Bluetooth off and back on with the toggle at the top of the Bluetooth screen.

  1. Whichever list you find it in, tap on the entry for your Elf to begin pairing.  You should presently see a pairing request appear on your iOS Device - tap Pair.

  1.  You also need to tap the bottom button on the Bad Elf GPS to accept the pairing. If you forget this important step, the pairing will fail.

  1. Once the pairing succeeds, you should see it listed as Connected in the list of devices on your iOS device.


For any further assistance, please contact our support team via support@bad-elf.com.


    • Related Articles

    • Bad Elf GPS: Downloading trips

      The Bad Elf GPS app is used to download trips that have been logged locally to the Bad Elf GPS Pro, Pro+, or GNSS Surveyor. The process is the same for each of these Bad Elf devices. When connected to your iOS device, the Bad Elf app will scan any ...

    • Bluetooth GPS: Anatomy of a Bad Elf Bluetooth Receiver

      The Bad Elf receiver has three buttons to the left of the front LCD display. These are your main unit controls. The top button controls power and the LCD backlight, the middle button controls Bluetooth and barometer* settings, while the bottom button ...

    • Bluetooth GPS: How to Control Data Logging on a Bad Elf GPS

      Data logging is a feature found on the Bad Elf GPS Bluetooth models; The Bad Elf GPS Pro, The Bad Elf GPS Pro+, and The Bad Elf GNSS Surveyor. By holding the GPS (bottom) button on a Bad Elf for 3 seconds you toggle the data logger ON. Remember: You ...

    • Bluetooth GPS: Clearing the Bluetooth Pairing Manifest

      This functionality is found on all Bluetooth models of a minimum firmware release;  Bad Elf GPS Pro(BE-GPS-2200): v2.0.66,  Bad Elf GPS Pro+ (BE-GPS-2300) v2.1.20, and Bad Elf GNSS Surveyor (BE-GPS-3300) v2.1.20. With the Bad Elf GPS turned OFF, ...

    • Bluetooth GPS: Pairing a Bluetooth Bad Elf with Android

      Connecting a Bluetooth Elf to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf GPS device by pressing and holding the Power (top) button for 3 seconds. On your phone or tablet, navigate to Settings > ...