Bluetooth GPS: Power Settings

Bluetooth GPS: Power Settings

Here is a breakdown of the power settings within the Bad Elf GPS app for the Bad Elf Pro, Bad Elf Pro+, and Bad Elf GNSS Surveyor.


Auto-on with USB power

When set to "Yes", this setting causes your Bad Elf GPS to turn on automatically any time it is connected to USB power.


Auto-off when idle

When enabled, this setting will cause your Bad Elf GPS to turn off automatically after the specified interval when a) not connected to USB power, b) not paired with any device over Bluetooth, and c) not data logging.


If you have any questions, contact us at support@bad-elf.com.


    • Related Articles

    • Bluetooth GPS: Custom Name

      Giving your Bad Elf a custom name can be helpful.  It can differentiate your Bad Elf from others in the area as well as make it quicker to find your specific Bad Elf in the multitudes of Bluetooth devices that are often listed under Bluetooth ...
    • Bluetooth GPS: Clearing the Bluetooth Pairing Manifest

      This functionality is found on all Bluetooth models of a minimum firmware release; Bad Elf GPS Pro(BE-GPS-2200): v2.0.66, Bad Elf GPS Pro+ (BE-GPS-2300) v2.1.20, and Bad Elf GNSS Surveyor (BE-GPS-3300) v2.1.20. With the Bad Elf GPS turned OFF, press ...
    • Bluetooth GPS: Auto-Off when Idle

      This setting is available to any Bad Elf Bluetooth GPS, including the Bad Elf GPS Pro (BE-GPS-2200), the Bad Elf GPS Pro+ (BE-GPS-2300), as well as the Bad Elf GNSS Surveyor (BE-GPS-3300). Your Bad Elf can be configured to shut itself down when ...
    • Bluetooth GPS: Pairing a Bluetooth Bad Elf with iOS

      Connecting a Bluetooth Elf to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf GPS device by pressing and holding the power (top) button for 1-2 seconds. On your iOS Device, open the Settings app, tap ...
    • Bluetooth GPS: Pairing a Bluetooth Bad Elf with Android

      Connecting a Bluetooth Elf to your phone or tablet couldn't be easier, just follow these simple steps: Power ON your Bad Elf GPS device by pressing and holding the Power (top) button for 3 seconds. On your phone or tablet, navigate to Settings > ...