Integration : Foolography
The Elf needs a small amount of configuration to allow pairing with the foolography antennae.
Your Bad Elf Bluetooth GPS needs to be ON and connected to your iOS device.
Open our app and tap the entry for your Bad Elf
Scroll down and select Bluetooth Settings, here we will need to make two changes from the default values.
Allow Pin 0000 needs to be set to Always or Until power down
Anonymous pairing needs to be set to Yes
For any further assistance, please contact our support team via support@bad-elf.com.
Related Articles
Integration: External Antenna
Legacy Content: This article references our end of life product. For recommended product alternatives, see Choosing the Right GPS/GNSS Receiver for Your Work → The USB port can be set to specific data rates and at one time the standard rate that the ...
Integration: Pairing with Mac
Legacy Content: This article references our end of life product. For recommended product alternatives, see Choosing the Right GPS/GNSS Receiver for Your Work → On your Mac open up System Preference Select Bluetooth, you will see the screen below. ...
Integration: Esri Collector for Android
Esri Collector is able to call for positional information directly from our line of Bluetooth Receivers. The direct connection allows for Collector to get a much richer data set from the Bad Elf receiver leading to better results on your end. Getting ...
Integration: Pairing with Windows 10
Legacy Content: This article references our end of life product. For recommended product alternatives, see Choosing the Right GPS/GNSS Receiver for Your Work → To pair the GPS Pro/Pro+/GNSS Surveyor with your Windows device please follow the ...
Integration: Esri Collector for iOS
Legacy Content: This article references our end of life product. For recommended product alternatives, see Choosing the Right GPS/GNSS Receiver for Your Work → Esri Collector is able to call for positional information directly from our line of ...