Wombat: Manual connection
You have received your Bad Elf Wombat. Congratulations! If you are new to the Bad Elf Family, welcome. If you have
previously used Bad Elf in the past, welcome to Wombat. Let's get down to business, though: Connecting your
Wombat to your iPhone or iPad.
Turn on your Wombat, using the switch on its side. You will see the red power icon light up on the top. After approximately a minute, you will see the blue Wi-Fi icon turn solid. Your Wombat is now fully booted up!
- Go to the Settings app on your iPad or iPhone, and go to the Wi-Fi tab. If you are within range of your Wombat, you will see it show up in the Choose a Network... list. Tap on your Bad Elf Wombat.
- Enter the password for your Wombat. This is printed on the back of your Wombat. When your password is entered, tap Join.
Congratulations! Your Wombat is connected to your iPad or iPhone. Head over to the Bad Elf Wombat app, or the Jeppesen Distribution Manager (JDM) to start transferring your data files. If you are using JDM, you will still need to connect the Wombat within the JDM app. We have instructions on that here: JDM Instructions.
connected to Wi-Fi. This is expected, and normal! While Wombat uses Wi-Fi hardware as a bridge, but it does not connect you to the internet.
Related Articles
Wombat: Firmware Upgrade
Let's go through the process of updating your Wombat's Firmware. This is the Bad Elf Wombat App landing page. My Wombat's mode is currently set to Logs, so if yours looks different, it may be because your Wombat is set to Avionics Databases mode. Do ...Wombat: Connecting to iOS iPhone
Turn on your Wombat. It may take up to a minute for the Wombat to fully boot. When this process is completed, the Wi-Fi icon on the Wombat will be solid blue. Go to the Settings App. Tap Wi-Fi to bring up the Wi-Fi settings. Tap on Bad Elf Wombat to ...Wombat: Connecting to iOS iPad
Turn on your Wombat. It may take up to a minute for the Wombat to fully boot. When this process is completed, the Wi-Fi icon on the Wombat will be solid blue. Go to the Settings App. Tap Wi-Fi to bring up the Wi-Fi settings. Tap on Bad Elf Wombat to ...Connecting to Wombat on iPhone
1. Turn on your Wombat. It may take up to a minute for the Wombat to fully boot. When thisprocess is completed, the Wi-Fi icon on the Wombat will be solid blue. Go to theSettings App. TapWi-Fito bring up the Wi-Fi settings. Tap onBad Elf Wombat to ...Wombat: Setup process
Congratulations on your new Wombat! Let's look at what you'll need to use your Wombat, whether you're using a Piston Edition Wombat or Turbine Edition Wombat. There are two apps you'll be using with your Wombat. Bad Elf Wombat App ...