Companion App
Bluetooth GPS: Datalogger Settings
Dynamic Platform Models The following configurations adjust the u-blox navigation engine to the expected user environment. Platform Description Portable Applications with low acceleration, e.g. portable devices. Suitable for most situations. ...
Bluetooth GPS: Datalogger Settings
Here is a breakdown of the datalogger settings within the Bad Elf GPS app for the Bad Elf Pro, Pro+, and GNSS Surveyor. Datalogger Turn data logging on and off and save points of interest on your Bad Elf GPS. Logging Rate The above setting determines ...
Bluetooth GPS: Enabling a Passcode Lock
On all of our Bluetooth GPS receiver models, it is possible to set a passcode to protect your data. This tutorial will use the GPS Pro+, but the process is the same for the Pro, and the GNSS Surveyor models. From the main screen of the Bad Elf GPS ...
Bluetooth GPS: Display Settings
Here is a breakdown of the display settings within the Bad Elf GPS app for the Bad Elf Pro, Bad Elf Pro+, and Bad Elf GNSS Surveyor. Speed Altitude Display Coordinates Altimeter Setting (Pro+ and GNSS Surveyor only) Pressure (Pro+ and GNSS Surveyor ...
Bluetooth GPS: Power Settings
Here is a breakdown of the power settings within the Bad Elf GPS app for the Bad Elf Pro, Bad Elf Pro+, and Bad Elf GNSS Surveyor. Auto-on with USB power When set to "Yes", this setting causes your Bad Elf GPS to turn on automatically any time it is ...
Bluetooth GPS: Bluetooth Settings
Here is a breakdown of the Bluetooth settings within the Bad Elf GPS app for the Bad Elf Pro, Pro+, and GNSS Surveyor. Enabled on startup This setting determines whether pairing via Bluetooth is to be enabled or disabled when your Bad Elf GPS starts ...
Bluetooth GPS: Auto-Off when Idle
This setting is available to any Bad Elf Bluetooth GPS, including the Bad Elf GPS Pro (BE-GPS-2200), the Bad Elf GPS Pro+ (BE-GPS-2300), as well as the Bad Elf GNSS Surveyor (BE-GPS-3300). Your Bad Elf can be configured to shut itself down when ...
Bluetooth GPS: Configuring a Simplified NMEA set
By default, your Bad Elf is designed to stream the full complement of NMEA sentences available from its specific GNSS Engine to a connected non-iOS client. On occasion, the NMEA parser built into the 3rd party software can't handle one or several of ...
Bluetooth GPS: Legacy Pairing by Enabling PIN 0000
Some devices rely on a PIN number* to allow the pairing process to occur. This is related to a legacy BT specification and the Elf can be configured to supply the generic pin 0000 to support this requirement. The Bad Elf GPS Pro, Bad Elf GPS Pro+, ...
Bluetooth GPS: Configure coordinate system displayed on LCD
Your Bad Elf Bluetooth GPS can display three separate coordinate systems all based on the same positional data. You can configure the format to match that used by your mapping system. As a rule of thumb modern mapping tends to use Decimal Degrees, ...
Bluetooth GPS: Custom Name
Giving your Bad Elf a custom name can be helpful. It can differentiate your Bad Elf from others in the area as well as make it quicker to find your specific Bad Elf in the multitudes of Bluetooth devices that are often listed under Bluetooth ...