Pairing with Esri Field Maps

Integration: Pairing with Apglos

This integration article will explain how to pair your Bad Elf GPS with ArcGIS Field Maps. 


  1. Pair your Bad Elf GPS to your phone via Bluetooth. Here are a few guides for iOS and Android:
    Bluetooth GPS: Pairing a Bluetooth Bad Elf with iOS
    Bluetooth GPS: Pairing a Bluetooth Bad Elf with Android
    Bad Elf Flex: Bluetooth Pairing with iOS
    Bad Elf Flex: Bluetooth Pairing with Android



  3. Under Settings> Location> tap Provider



  4. In Location Providers, tap Add then select your device (If your device is not a part of this list you will have to check your
    Bluetooth connection status between your Bad Elf and your phone/tablet)



  5. After selecting the Bad Elf receiver, select the appropriate height for the antenna.
    If height is not relevant for you, leave this setting at 0. Otherwise, we suggest using a pole
    with a fixed height. Simply enter the pole height and the additional antenna offset for
    the GPS unit. The Bad Elf Flex antenna offset is 23 cm above the base of the receiver. Tap Done



  6. Once complete, select the Bad Elf GNSS receiver from the Location Provider screen.
    Ensure the check-mark is displayed next to the Bad Elf receiver. 


For further assistance, please contact our support team via support@bad-elf.com.

    • Related Articles

    • Integration: Pairing with Apglos Survey Wizard

      This integration article will explain how to pair your Bad Elf GPS with Apglos Survey Wizard. Pair your Bad Elf GPS to your phone via Bluetooth. Here are a few guides for iOS and Android: Bad Elf Flex: Bluetooth Pairing with iOS Bad Elf Flex: ...

    • Integration: Collecting Your First Point with Apglos Survey Wizard

      This integration article will explain how to collect your first point with your Bad Elf GPS with Apglos Survey Wizard. Pair your Bad Elf GPS to your phone via Bluetooth and configure it in Apglos Survey Wizard. See "Integration: Pairing with Apglos ...

    • Integration: Pairing with ArcGIS QuickCapture

      This integration article will explain how to pair your Bad Elf GPS with ArcGIS QuickCapture. Pair your Bad Elf GPS to your phone via Bluetooth. Here are a few guides for iOS and Android: Bluetooth GPS: Pairing a Bluetooth Bad Elf with iOS Bluetooth ...

    • Integration: Pairing with Esri Field Maps

      This integration article will explain how to pair your Bad Elf GPS with ArcGIS Field Maps. Pair your Bad Elf GPS to your phone via Bluetooth. Here are a few guides for iOS and Android: Bluetooth GPS: Pairing a Bluetooth Bad Elf with iOS Bluetooth ...

    • Differential GPS (DGPS) Configuration - iOS

      Legacy Content: This article references our end of life product. For recommended product alternatives, see Choosing the right RTK network for your Bad Elf GNSS Receiver The Bad Elf GNSS Surveyor uses an RTCM 2.3 feed delivered through an NTRIP client ...